Operation; Connecting Power; Operating The Pump; Care And Cleaning - Everbilt RSE50W-HDC Guide D'utilisation Et D'entretien

Operation

1

Connecting power

□
Plug the pump power cord plug into a 115V GFCI power
outlet.
□
Allow pump to operate through several on-off cycles.

Care and Cleaning

To clear a pump that is clogged with debris:
□
Unplug the pump to disconnect the electrical power.
□
Unscrew the screw (4) on the volute and the five screws (3) on the seal plate. Remove the volute (1).
□
Remove debris from around the impeller (2).
□
Reassemble the pump.
4
2

Operating the pump

□
When the float switch (1) moves up over the top of the
pump, the pump begins to operate. When the water lowers
to a certain level, the float switch (1) will turn the pump off.
NOTE: Ensure the pump is submerged in water. Running the
pump dry can damage the pump.
1
7
Please contact 1-844-883-1872 for further assistance.
HOMEDEPOT.COM