MyKronoz ZeRound 2HR Mode D'emploi page 6

1. CHARGING
1.
3.
6
Charge ZeRound
first use.
1. Put the charging cradle beneath the watch.
2. Make sure the pins fit correctly onto the char-
ging terminals on the back of ZeRound
2.
3. Connect the charging cradle with the USB
cable.
4. Plug the big end of the USB cable to a
power source.
5. A battery indicator will fill to indicate charging
is in progress. Once ZeRound
battery indicator will be full.
i
for two hours before your
2HR
2HR
A full charge takes 2 hours. Unplug the
cable after ZeRound
When the battery level gets low, a low
battery indicator will appear.
.
2HR
is charged, the
is fully charged.
2HR