Frequently Asked Questions / Troubleshooting - VITO VIBCCSSFL20 Mode D'emploi

FREQUENTLY ASKED QUESTIONS / TROUBLESHOOTING

Question/Problem - Cause
The hedge trimmer doesn't switch on when you
press the on/off switch":
• Discharged battery;
• Switch connections are not in good condition or
switch does not work;
The on/off switch is blocked:
• The on/off switch is center positioned and locks
the switch;
Engine emits abnormal sound, starts intermittently
or rotates slowly:
• Switch connections damaged;
• Mechanical obstruction;
• The hedge trimmer is under excessive pressure,
engine overloaded;
Blade overheats:
• There's no consistent grease on the blade;
Body overheats:
• Machine overloaded;
• The housing or parts inside the hedge trimmer
are incorrectly assembled;
Solution
• Charge the battery;
• Repair or replace the switch;
• Select the direction of rotation wanted;
• Repair or replace the switch;
• Inspect the mechanical components;
• Reduce the pressure;
• Put grease in the fixing notch of the drill accessory;
• Reduce working pressure;
• Check whether there is any blockage;
27