AXESS MPBW6507 Manuel D'utilisation page 2

TO CUSTOMERS
Thank you for your support and trust on purchasing the products of our
company. To fully exert the function of the product, we suggest you to read
the operating instruction carefully before using it, for the convenience of
grasping the connection method and using points. Please take care of the
operating instruction after reading it for the purpose of further reference.
SPECIFICATIONS
Speaker Type Double 3" +5.25" Subwoofer
Speaker Power 25W, 700 Watt PMPO
Frequency Response
150Hz - 18KHz
Bluetooth Version V5.0
Charging Input DC5V
Output Voltage 3.7V
Battery Capacity 2400mAh
Connections BT, FM, MicroSD, USB, AUX, MIC
Accessories DC5V charging adapter, audio cable, remote
control, attachable strap, wired microphone
FEATURES
Handheld Hifi Wireless Speaker with 5.0V Bluetooth technology
•
Double 3" + 5.25" Subwoofer
•
10 meter operating range
•
Colorful LED lights display
•
Supports USB, microSD/TF, AUX and FM radio
•
TWS Link+ function
•
2400mAh rechargeable battery
•
3-5 hours of playtime, full battery charge time 2 hours
•
OPERATING BLUETOOTH
Bluetooth Version 5.0, with lower power consumption and over
•
10 meters operating range.
After powering on the speaker, "Blue" will flash across the display screen
•
and the speaker will announce that it is in "Bluetooth mode".
On the mobile device, turn on the device's Bluetooth, and begin to search
•
for "AXESS 6507". When it appears click the device name to confirm
and then the speaker should begin to connect.
Once the bluetooth connection is successful, the speaker will announce the
•
connection.
Note: "Blue" character will display on the screen during playback, and the
•
"Paus" character is displayed when paused.
TF/MicroSD Card Mode
Inserting the TF card speaker will automatically detect the TF card playback
•
mode and the "Play" character will display across the screen.
Note: The display shows the playback time during playback, and "Paus"
•
character are displayed when paused.
USB Disk Mode
Inserting the USB disk, the speaker will automatically detect the USB playback
•
mode, displaying "Play" and playback time.
Note: The display shows the playback time during playback, and "Paus"
•
character are displayed when paused.
AUX Mode
Plug one end of the 3.5mm audio cable into the speaker's auxiliar jack and the
•
other end of cable is plug into the phone or computer jack. The speaker will
detect the connection and change the speaker status to AUX mode.
The "Line" character is displayed on the screen in AUX mode. Press the
•
"Play/Pause" button to pause and play the music streaming from mobile device.
MIC Function
When speaker is power on, plug in the wired microphone to the appropriate
•
microphone input and it should begin to work automatically.
Charging
Plug the USB cable into the speaker to connect to the 5V charger or computer
•
to charge for inside Li-battery.
When the speaker is charging the indicator light will stay lit, and when the
•
battery is fully charged the red indicator light will turn off.
FM Mode
Press the MODE button to enter into FM mode
•
The speaker has a built-in radio antenna, no external antenna necessary
•
To search through stations, press and hold "Play/Pause" button
•
Mode Cycle
Press "MODE" button to switch between Bluetooth and FM mode
•
(Note: Only USB, TF, and AUX are displayed when in USB, TF, or AUX mode)
LED Flashlight
Press and hold "Mode" button to turn or off the LED light display.
•
TWS Function
Using your mobile phone connect one Bluetooth speaker successfully firstly.
•
Under bluetooth mode, double click Play/Pause button of another bluetooth
speaker to enter into TWS pairing.