Tekonsha P3 Mode D'emploi page 4

NOTE:
1. Front of the P3 must be horizontal, see below.
2. The P3 must be parallel to direction of travel,
see below.
Correct Incorrect
Direction of Travel Direction of Travel
Automatic Leveling of the Sensor
The P3 will automatically acquire the proper level
setting. It will also automatically adjust as you travel
up or down hills.
Set Brake Type
Press Menu/Options Button to view Setup screen.
Select/highlight Brake type and Press OK
(Menu Button).
Select/highlight Electric or Hydraulic and Press OK
(Menu Button).
Select/highlight Confirm and Press OK (Menu Button).
Screen should show Brake Type Setting E (Electric) or
H (Hydraulic) in the lower left of screen.
4