EN
User Manual
Data- and charging cable
1
Safety Instructions
1.1
General
•
Read the user manual completely and carefully before use.
The user manual is part of the product and contains important informati-
on for correct use.
•
Keep this user manual.
The user manual must be available for uncertainties and passing the product.
•
Compare the specifications of all used devices to ensure
compatibility.
•
Do not repair defective products by yourself, but contact the
dealer or producer.
•
Do not modify or alter product nor accessories.
•
Avoid stresses such as heat and cold, moisture and direct
sunlight, vibration and mechanical pressure.
•
Do not rotate, bend or mechanically strain otherwise In inser-
ted state.
•
Only use in dry ambience.
•
Risk of injury by stumbling and falling
•
Short circuit to ground - Do not connect already connected
devices to other interfaces of the vehicle simultaneously.
1.2
Warning levels
Warnings against hazards that may result in injuries in case
of non-observance.
Warnings against hazards that may result in material
damage in case of non-observance.
2
Description and Function
2.1
Standard cables
Standard cables are simple charging and / or data cables that adapt manufacturer-
specific connectors to USB and thus enable the charging and / or the data exchange
to PC or other devices. The maximum data transfer rate is always this of the slowest
connection standard installed.
Fig. 8: Sample figure - Standard cables
2.2
HighPower cabls with Easy USB-A and Micro-USB
High Power cables are charging and data cables, come with reversible USB and / or
Micro-USB ports and allow the 180° two-sided usability particularly easy insertion.
High Power cables are designed for higher charging currents than standard cables.
Fig. 9: Sample figure - High Power cables
•
Connect the cable as usual or 180° turned with your device.
2.3
Extendable cables
Extendable cables are charging and / or data cables that are compact and do not tie.
Fig. 10: Sample figure - High Power cables
Material damage
Retractable cables lock in the desired length.
Sidewise pulling can damage the winding mechanism.
•
Take a plug in each hand, pull the cable carefully and evenly
to the desired length apart.
•
Unplug the extended cable gently 1-2 cm apart, so that the
winding mechanism is activated.
2.4
2 in 1 cables
2 in 1 cables come with 2 different, vendor-specific connectors on their output side
and adapt to USB.
Fig. 11: Sample figure - 2 in 1 cables
REV2016-02-16
V1.0
Material damage
2 in 1 cables are not made for parallel operation with 2 devices on their
outputs, because it may overload the cable otherwise.
•
Connect only 1 device to the output side.
2.5
Leather cables
Leather cables have the same facilities as standard cable, but are coated by leather
or synthetic leather.
Fig. 12: Sample figure - Leather cables
2.6
Spiral cables
Spiral cables are simple charging and / or data cables that adapt manufacturer-
specific connectors to USB and thus allow you to charge and / or to exchange data to
PC or other devices. The spiral design allows space-saving operation and storage.
Fig. 13: Sample figure - Spiral cables
2.7
Flat cables
Flat cables are simple charging and / or data cables that adapt manufacturer-specific
connectors to USB and thus allow you to charge and / or exchange data to PC or
other devices. The flat cable design allows space-saving operation and prevent
knotting.
Fig. 14: Sample figure - Flat cables
2.8
Scope of delivery
Charging and / or data cable, user manual
3
Intended Use
We do not permit using the device in other ways like described in chapter
Description and Function. Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4
Connecting and Laying
Risk of injury by stumbling
•
Place, install and transport product, product parts
and accessories in a safe way.
5
Maintenance, Care, Storage and Transport
The products are maintenance-free.
Material damage
•
Clean only with a dry, soft cloth.
•
Do not use cleaning agents and chemicals.
•
Store cool and dry.
•
Keep and use the original packaging for transport.
6
Liability notice
We reserve the right to printing errors and changes to product, packaging
or product documentation.
•
See our terms of warranty. These are available in their current
form under the given contact details.
7
Disposal Notes
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami
native and hazardous substances can pollute our environment.
As a consumer, you are committed by law to dispose electrical and electronic de-
vices to the producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on the pro-
duct, in the user`s manual, or at the packaging alludes to these terms. With this kind
of waste separation, application, and waste disposal of used devices you achieve an
important share to environmental protection.
WEEE No: 82898622
- 2 -
Goobay
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
®