Brandson 303598 Mode D'emploi page 19

5. Initial use
1. Insert the power cord of the vacuum cleaner into the socket and press the
"ON/OFF" switch on the top to start using the appliance.
2. Place the appliance on the material to be cleaned (e.g., bed linen, clothing
etc). Press the "ON/OFF" switch to switch on the vacuum cleaner.
3. Press the "Vibration" switch by simultaneously applying slight pressure
downwards, so that the two activity sensors are actuated. The ultraviolet
and vibration function is now switched on.
Note: You can see if the UV lamp is turned on through the dust collector.
6. Cleaning and Care
Cleaning the dust collector
1. Please first turn off the power switch of the appliance and then disconnect
the power cord.
2. Please remove the cover of the dust collector.
3. Dispose of the contents of the collector and then remove the HEPA filter
to clean it.
1
English
2
19