Genetec MONETEC Saturne Mode D'emploi page 7

8.2 Table fixation
•
Locate the two holes (E) located under the detector (Indice / drawing 4).
•
Present the 2 holes (B) mounting plate in front of the 2 holes (E) of the detector (Indice / drawing 5).
•
Screw to it mounting plate with the screws provided in supplement.
•
Fix to it mounting plate on the support of your choice by means of the 2 holes C and of screw.
9- After-Sales Service
Please contact your reseller for returning material.
10- Conditions of guarantee
Further to the legal guarantee in force in your country, your Monetec detector benefits from a special guarantee against manufacturing defects
for a one-year period following the original date of purchase by the first buyer.
This guarantee includes labour expenses and spare parts. It does not include transport and travelling expenses.
10.1 Exclusion of damages
•
The battery as well as any damage caused by it and its replacement. Damage of plastic components. Damage or failure due to
external elements such as fire, lightening, water and other liquids (fizzy drinks, oils, etc.).
•
Consequences of incidents or accidents due to nearby unrelated electric and electrostatic currents or any other cause such as
intense radio and electromagnetic fields.
•
Problems due to improper use of the machine.
11- Technical hitches
Symptom
•
The 3 status lights are flashing.
The detector is exposed too much to the ambient light. Move it in a less exposed place.
•
Check the good connection of the power pack or battery to the detector.
None of the status lights are lit. •
Check that the power pack is well connected to the electrical supply network.
•
Your battery is too low, replace it.
•
The orange status light is flashing.
You are scanning the banknote too fast, repeat the test at a slower pace.
•
The orange et green status light is
The banknote is badly plated at the bottom of the guide banknote.
flashing.
•
The detector systemati call y
Check that your test is carried out on the front of the banknote.
analyses banknotes as counterfeit. •
Check that the test is well carried out on the entire length of banknote.
Copyright Genetec, 2006. All rights reserved.
Reproduction, adaptation or translation without former permission in writing is prohibited, unless authorised by applicable copyright laws.
Information contained within this document may be subject to change without prior notification. These instructions are not contractually binding.
Inappropriate use of the product will render the sales guarantee null and void. Genetec cannot be held responsible for direct or indirect
damage, or damage allegedly linked to the supply or use of information contained herein. Registered brand / Designed and manufactured in
the European Union.
Reference n°: SaturneME / Edition: Mars/2006
User guide
Possible cause and action
UK-4
This device only functions on Euro banknotes.
We would like to thank you for choosing Monetec.
Your Saturne detector has internal upgradeable software. To ensure optimal performance of your detector, please download
the latest version of the software when it is first used and check the availability of new versions of this software regularly on :
See
3.3 1- Precautions
1.1 Place of use
4
1.2 Precautions for use
2- Power Alimentation
2.1 Power pack Alimentation
2.2 Battery Alimentation
3- Using the detector
3.1 On / Off
3.4
3.2 Test
3.3 Positioning
3.4 Analysis results
3.1 3.4 Speed of the test
3.5 Final result
4- Replacing the battery
5- Sound signal
6- Software maintenance
6.1 Registration
6.2 PC Connection
7- Ambient light
8- Mounting plate
8.1 Mural assembly
8.2 Table fixation
9- After-Sales Service
10- Conditions of guarantee
10.1 Exclusion of damages
11- Technical hitches
12- Technical Drawing
User guide
Instructions
Important information concerning updates
www.monetec.com
Table of contents
UK-2
UK-2
UK-2
UK-2
UK-2
UK-2
UK-2
UK-2
UK-2
UK-3
UK-3
UK-3
UK-3
UK-3
UK-3
UK-3
UK-3
UK-3
UK-3
UK-3
UK-3
UK-4
UK-4
UK-4
UK-4
UK-4
Indice
UK-1