Samsung SEK-3000 Mode D'emploi page 5

Attaching the Evolution Kit
1. Turn off the TV.
2. Unplug the power cord.
Insert the Evolution Kit's two tabs into the two slots on the TV as shown in the diagram below, and then plug the Kit
3.
into the TV .
Before snapping the Evolution Kit into place, make sure that the two tabs have been inserted securely into the two
✎
Evolution Kit slots on the back of the TV. The kit can be damaged if you continue without securely positioning the
tabs in the slots.
1 1
4. To make sure the Evolution Kit is attached securely, press it again, as shown in the figure.
SEK3000_ZA_BN68-07377E-01_L02.indb 5
2
English-5
2016-10-18 오후 5:24:20