Seat Post Installation; Pedals Installation - JUPITERBIKE SUMMIT Mode D'emploi

SEAT POST INSTALLATION

PEDALS INSTALLATION

6
Unlatch and loosen seat
clamp. Put seat post in
frame and adjust to desired
height. Retighten and re-
latch clamp.
Install the pedal with the L
on it on the left side of the
bike. It should hand twist
easily on the pedal arm. If
it doesn't, it might not be
going in straight. Unscrew it
and try it again.
Use a wrench for the last
1 or 2 turns. Repeat with
the R pedal on the other
side. The R pedal is reverse
threaded so twist in the
opposite direction.