Assembling - CFH EFB 675 Mode D'emploi

52675
There is the need to identify safety measures to protect the operator that are
based on an estimation of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to the trigger time)

ASSEMBLING

Pull out the main e-joint brush body from the coloured box. In order to
save package size, we adjust the angle of the main handle before we
pack it (Fig.1). Please re-adjust to the correct angle as shown in Fig. 2
before use.
Fig.1 Fig.2
Assemble auxiliary handle (see Figure)
Assemble the auxiliary handle to the mount provided, then secure the auxili-
ary handle with the help of the screw
and the adjustment lock provided.
Adjusting the angle of auxiliary handle (see Figure)
Undo the adjustment lock knob for the auxiliary handle until it can be moved
forwards or backwards without any great resistance. Set the required position
and tighten the lock knob again.
48
GB