Use Of The Product - FITFIU BEST-320 Manuel D'instructions

USE OF THE PRODUCT

CONTROL PANEL
ESPECIFICACIONES:
- Time: 00:00-99:59 Min:Sec
- Speed: 0.0-99.9 Km/h
- Distance: 0-99.99 Km
- Calories: 0-999.9 Kcal
- Odometer: 0.00-999.9Km
- Pulse: 40-240 BPM (beats per minute)
MODE:
The key allows you to select a certain function at any time. If you select "Scan" the screen will change every few
seconds to show the different functions (Time, Speed, Distance, Calories, Odometer, Press).
AUTO ON/OFF:
To save energy, the monitor will turn off automatically if there is no speed signal or if the button is not pressed after 4
minutes. The monitor will turn on automatically when you start your exercise or by pressing the button.
TIME:
Select this function by pressing the button continuously until the pointer is on the TIME position. The screen displays
the time elapsed during the workout.
SPEED:
Select this function by pressing the button continuously until the pointer is on the SPEED position. The screen
displays the current speed.
DISTANCE:
Select this function by pressing the button continuously until the pointer is on the DISTANCE position. The screen
displays the distance ran during the exercise.
CALORIES:
Select this function by pressing the button continuously until the pointer is on the CALORIES position. The screen
displays the calories consumed during exercise.
ODOMETER:
Select this function by pressing the button continuously until the pointer is on the ODOMETER position. The total
accumulated distance will be shown on the screen.
PULSE:
Select this function by pressing the button continuously until the pointer is on the PULSE position. User's current
heart rate will be displayed in real time.
RESET:
The unit can be reset (to 0 values) by either changing battery or pressing the MODE key for 5 seconds.
BATTERY:
If the monitor screen does not look good, reinstall the batteries to get a good result. The display uses 2 "AA"
batteries.
50