NEFF Z31PX10X0 Mode D'emploi page 12

en
To prevent overheating, the
■
temperature sensor must not be
pointed towards another item of
cookware that is hot.
Remove the temperature sensor
■
from the saucepan after cooking.
Store it in a clean, safe place away
from sources of heat.
Changing the battery
If you press the wireless temperature
e r y C h a n g i n g t h e b a t t
sensor symbol and the LED does not
light up, the battery is flat.
Changing the battery:
Remove the silicone cover from the
1.
lower section of the casing. Unscrew
the screws with a screwdriver.
Remove the upper section of the
2.
casing. Take the old batteries out.
Put the new batteries in. Make sure
that the polarity is correct.
12
Caution!
Do not use metal objects to remove
the battery. Do not touch the
contacts.
Put the upper and lower sections of
3.
the casing back together. Make sure
that the contact pins are aligned
correctly.
Put the silicone cover back on the
4.
lower section of the temperature
sensor casing.
Note: Only use premium-quality
CR2032 batteries. These have an
especially long service life.