Wireless Charging; Setting The Time & Alarm; Setting The Alarm - Bigben RR140I Mode D'emploi

Wireless charging

Compatible with wireless charging enabled smartphones. Other smart phones need to use wireless
charging adapters to work.
Put mobile phone on the top panel.
*Note: When the phone is being charged your phone's charging indicator will show as normal.
*Note: For maximum charging efficiency, the phone must be aligned with the center of the charging
area.
*Note: Phones that are capable of wireless charging may need to be placed slightly off center. The
built-in wireless receiver may not be centered inside the phone. This varies by brand/model.
Note: Wireless Charging and Radio / Aux in can be used at the same time.
Setting the time
• Press Power to enter standby mode.
• Press & hold Time Set (7) for 2 seconds. The display will flash.
• Press HR (Hour) Set / Min (Minute) Set (8, 9) to set the hour and minute.
• The Clock will show 24H mode.

Setting the alarm

• Press Power to enter standby mode.
• In standby mode, press & Alarm 1 (3) for 2 seconds and, the main digit will show 0:00.
• Press Hour (8) & Min (9) to set the alarm hour & minute.
• Press Alarm 1 (3) again to confirm alarm 1.
• Press Skip - / + to switch between the alarm outputs:
"Buzzer" and "FM" radio
• Press Alarm 1 to confirm the alarm output.
• There is dual alarm. Repeat the above steps to set Alarm 2 (4) & select the alarm output. Once the
alarm is set, the alarm display light will be ON.
- EN 5 -
Correct
Incorrect