Publicité
Les langues disponibles
Les langues disponibles
QCRS1
Programming – channel CH1:
1) Press one time the P1 button. The led flashing
slowly.
2) Press the transmitter button.
3) Repeat point 2 if you need add more
transmitters.
4) To finish the procedure press 2 times P1 button.
The led still off.
Programming – channel CH2:
1) Press one time the P1 button. The led flashing
slowly.
2) Press one time again the button P1. The led
flashing fast.
3) Press the transmitter button.
4) Repeat step 3 to add more trasmitter.
5) To finish the procedure press one times the P1
button.
Reset procedure
(To cancel programmed codes):
1) Press and hold P1 button. The led on.
2) After 10 sec the led starts flashing.
3) Release P1 button
POWER SUPPLY
24 V DC/AC
FREQUENCY
433.92 MHz
RELAY
1A / 30 VDC
CONSUMPTION (STANDBY)
30 mA
LED
P1
CH2
CH1
Power supply
IRRADIATION ON ANTENNA
-60 dBm
PROTECTION RATE
IP 55
24V~
SENSITIVITY
102 dBm
WORKING TEMPERATURE
-20°C/+60°C
Publicité
