•
Select audio source by pressing the INPUT key on the front panel or on the remote control. When
selecting AC-3 input, the machine can link decoder to 5.1 channel output.
•
Adjust the volume with VOL+/- or with VOL/MULTI on the device front. Adjust treble/bass with the
corresponding buttons on the RC or launch the MUSIC MENU on the device. In this case, press MUSIC
MENU repeatedly to scroll through the options. Use the MULTI knob to adjust the respective value.
Press MUTE to mute or un-mute the sound output.
•
Press DSP to change the display mode. Press CH.MODE to change the channel mode (AC-3 / Stereo).
•
Use the surround speaker buttons on the RC to adjust the volume levels of each speaker separately.
•
The device automatically „notices" which microphone is connected at the time. Please always turn the
microphone volume down before connecting a microphone.
•
Use the microphone sound setting buittons on the RC or use the MIC.MENU to adjust sound options
for the microphone inputs, such as M TRE (treble), M BASS (bass), ECHO (reverb effect) und MIC VOL
(microphone volume).
Please note: Do not cover the microphone capsule with your hands and try to avoid pointing the
microphone towards a speaker cone - both will lead to a hooting feedback, particularly when the out-
put volume level is rather high.
•
This unit has three HDMI input jacks and one HDMI output jack for digital audio and video signal input/
output. Connect the HDMl1,HDMl2,HDMl3 jack of this unit to the HDMI output jack of other HDMI
components (such as a DVD player).Connect the HDMI OUT jack of this unit to the HDMI input jack of
other HDMI components (such as a TV and a projector).
•
The video or audio signals input at the HDMI IN jacks of the selected input source are output at the
HDMI OUT jack of this unit.
ATTENTION:
This receiver works as an HDMI-hub. In order to listen to an ingoing HDMI audio signal another HDMI-
ready device - typically a TV - has to be connected to the HDMI output of this receiver. It is not possible
to listen to a HDMI audiosignal directly via this receiver.
12
How To Use
Basics
Karaoke
HDMI