Table des Matières
Publicité
INSTALLATION
Select a location to install the receiver
base. Mount the receiver at least 6˝ above
the ground using the built-in keyhole
mount. The outlets must be pointed
downwards to prevent exposure to rain.
All outdoor devices should be plugged
into a GFCI electrical outlet to prevent
electrical shock. Consult a qualified
electrician if your outdoor outlet is not of
this type or you're not sure of its type.
OPERATING INSTRUCTIONS
MANUAL MODE: In Manual Mode,
pressing the ON button on the transmitter
will turn on power to the receiver. Power
will stay on until you press the OFF
button. Pressing the OFF button will turn
power off to the receiver regardless of any
other mode in operation.
PHOTOCELL MODE: Make sure the sliding
mode switch on the transmitter is in
the PHOTOCELL position. Press the ON
button to turn power on to the receiver. All
connected devices will turn on instantly
and will turn off automatically at dawn.
Publicité
Table des Matières
