Pleasant Hearth 23-153-213 Mode D'emploi page 6

ASSEMBLY INSTRUCTIONS
7. Attach the left door (G) to the left cabinet
using hinge screws as shown. Repeat using
the right door (G). Level the cabinet doors
using a Phillips screwdriver as shown in
inset diagrams. Attach knobs (DD) to each
door using screw included with knob (DD).
8. Insert 4 shelf pins (EE) into predrilled holes
in side walls of each cabinet at preferred
height.
Set adjustable shelves (M) in desired
positions in each cabinet.
9. Place the insert directly in front of the mantel
opening. Carefully lift the insert through the
center opening in the front of the fireplace.
The bottom of the insert has two foam
rubber strips to prevent scratching of the
hearth base. Slide the insert back through
the opening until the metal trim makes
contact with the front of the mantel.
7
G
8
EE
M
9
6
G
DD
M