Publicité
Les langues disponibles
Les langues disponibles
Operating instructions:
1. Check if the components in the package are exactly the same as the structure drawing.
2 Inlet assembly:
Connect the inlet strainer and the pipe, then connect it with elbow. Clip the suction cups to the pipe. Connect the inlet
hose with the elbow and then tighten the connection with the nut. Refer to the structure drawing. Put this aside and go
to the next step.
1. Outlet nut
2. Outlet
3. Knob
4. Impeller
5. Impeller cover
6. Air vent hose
7. Filter sponge
8. Hook
9. Canister
10. Chamber divider
11. Inlet
12. Inlet nut
13. Infill cover
14. lbow 1
15. Elbow 2
16. Long inlet tube
17. Short inlet tube
18. Inlet strainer
19. Suction cups
6
Publicité
