EASYBKA - EASYBKR
8.1
Entering Programming Mode
1.
Press the "#" key two times.
Mode LED will turn off. Door
LED will turn red.
2.
Insert the programming code.
3.
If the Programming Code is
valid the door LED will turn
green and the EASYBKA/R will
be in Programming Mode.
NOTE
The EASYBKA/R must be
in Normal Mode to enter the
Programming Mode.
The factory default Programming Code is 1234
If a Programming Code is not entered within 5 seconds, the
EASYBKA/R will return to Normal Mode.
8.2
To exit the Programming Mode
1.
Press # twice to exit Programming mode at any time. You hear 3
beeps.
2.
The Door LED will be off and the Mode LED will turn green, the
EASYBKA/R has returned to Normal Mode.
NOTE
Wrong entries may reset the controller back to Normal Mode.
While in Programming Mode if no key is pressed for 1 minute
the EASYBKA/R will exit programming mode and return to
Normal Mode.
ENGLISH
41
ISEASYBK_08_18.pdf.docx
RED
GREEN