Safety Instructions - for_q FQ-LIO 4020 Mode D'emploi

Safety Instructions

WARNING
warnings and all instructions.
Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions
for future reference.
• Never use a damaged battery.
• Do not open the battery. There is a
risk of a short-circuit.
• Protect the battery from heat,
e.g. from continuous exposure to
sunlight, fire, water and humidity.
There is a risk of explosion.
• In case of damage and improper
use of the battery, vapours may
be emitted. Ventilate the area and
seek medical help in case of com-
plaints. The vapours can irritate
the respiratory system.
• Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact acciden-
tally occurs, flush with water. If
liquid contacts eyes, additionally
seek medical help. Liquid ejected
from the battery may cause irrita-
tion or burns.
• Use only original batteries with
the voltage indicated on the rating
plate of your electric power tool. If
other batteries are used, e.g. imi-
tations, reconditioned batteries
or third-party products, there is a
risk of injuries as well as damage
caused by exploding batteries.
• The battery voltage must match
the battery charging voltage of
the battery charger. Otherwise
there is a risk of fire and explosion.
• Recharge only with the charger
specified by the manufacturer.
A charger that is suitable for one
type of battery pack may create
a risk of fire when used with an-
EN
34
Read all safety
other battery pack.
• Pointed objects, such as nails or
screwdrivers, or external forces
may damage the battery. This may
cause an internal short-circuit and
the battery to burn, smoke, ex-
plode or overheat.
• When not in use, keep the bat-
tery away from paper-clips, coins,
keys, nails, screws, or other small
metal objects, that can cause a
short-circuit at the charging con-
tacts.
• Used batteries must be disposed
of safely and correctly.
For safety instructions for the bat-
tery charger please refer to the man-
ual of the charger.