LENCO LPJ-500 Mode D'emploi page 22

After initial pairing, the projector and the Bluetooth speakers will stay paired
unless unpaired manually by the user, or erased due to a reset of either device. If
this occurs or you find either unit is unable to connect, repeat the above steps.
Note: If external devices are connected with a VGA cable,
transmitted (no sound). The Bluetooth option can't be used in vga mode.
"This product has a bluetooth transmission function, you can not receive any
bluetooth sound on it: this means that you can transmit wirelessly a bluetooth
sound signal to an external device like a bluetooth speaker, bluetooth headphone,
audio system with bluetooth reception,..."
OSD Language
Bluetooth
Restore Factory Default
Panel Rotate
Info
Using Projector Menu 1.0
Press button to enter projector menu. Press again to previous status.
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Aspect Ratio
Noise Reduction
Screen
1. Picture Mode
Select Vivid, User (custom), Soft, or Standard
2. Contrast, Brightness, etc
Set Picture Mode to "User" to adjust these settings. Tint can only be adjusted in
AV and NTSC IN
3. Color Temperature
Select Warm, Cool, or Medium.
4. Aspect Ratio
Select zoom 2, zoom 1, 16:9, 4:3,
5. Noise Reduction
Select Off, Low, Middle, High or Default
6. Screen
Can only be adjusted when in VGA mode
Color temper... (temperature)
Customer define
English
0
Standard
50
Use
50
The selected item is displayed in the
50
upper right of the screen.
50
50
Medium
Auto
Middle
Auto, Panorama
Parameter
20
only video image is
buttons to select an item.