Getting Connected; Led Indicators - LEGRAND XMS-2624P Guide D'installation

3 - Preparing for Access
IP Addressing
If the XMS-2624P is connected to a network with a 192.168.0.X address scheme, and your computer shares a similar
address on the same network, you can skip to the next step, "Access and Setup".
CAUTION: If another device on your network shares the 192.168.0.4 address, you'll need to
temporarily reassign or remove that device while you configure the XMS-2624P.
If your network uses an address scheme other than 192.168.0.X, you'll need to set a temporary static IP address
on the computer you're using for configuration. To do so, set the IP address of your computer to an address in the
192.168.0.X range, then set the Gateway/Router address to 192.168.0.4 (the default IP address of the XMS-2624P).
Once you're finished configuring the switch, you can return your computer's IP configuration to normal, typically
"Obtain Automatically/DHCP."
NOTE: For more information, please refer to the "help configuring Access" (E-Catalogue Legrand).
4 - Access and Setup

Getting Connected

Use an Ethernet cord to connect your computer to the XMS-2624P, then power on the switch.
Logging In
To access the XMS-2624P web configuration, open your web browser and enter the switch's default 192.168.0.4 IP
address in the address field. Log in to the switch using the default user name and password:
Select the menu items on the left to view and/or modify the configuration.
CAUTION: This product must be set up by an confirmed network administrator.
5 - Hardware Operation
Front Panel
The front panel of the XMS-2624P includes 26 Gigabit Ethernet RJ 45 ports, two Gigabit SFP+ ports, status-, link- and
PoE LEDs, a Mode/Reset button and an RJ 45 Console port.
Rear Panel
The Rear Panel of the XMS-2624P features a standard AC power input along with a power switch.

LED Indicators

The LED indicators on the XMS-2624P include System, Link/Act and PoE LEDs, and an LED for each port. These LED
indicators show the operating status of the XMS-2624P and each port connection.
Default IP: 192.168.0.4
Username: admin
Password: admin
XMS-2624P Front Panel View
7