Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
When you use the diffuser for the first time, place it into a room half an hour before you switch it on. The
recommended room temperature is between 50°F and 85°F (= 10°C and 30°C) with a relative humidity
between 40% and 60%.
Place the diffuser on a flat and stable surface and away from the edge.
1.
Remove the top cover and the inner cover.
2.
Fill the diffuser water tank up to the MAX water line (150ml) with mineral water (bottled or tap water).
Make sure that the water does not exceed 100 °F (= 40°C).
3.
Add 3-15 drops of essential oil in the diffuser water tank and then close the covers.
4.
Fill the fountain water tank up to the MAX water line (140 ml) with mineral water (bottled or tap
water). Make sure that the water does not exceed 100 °F (= 40°C).
Do not add essential oil in the Fountains tank. Water only!
Remark: When the water level in the tank is too low or at zero, the diffuser stops automatically.
Remarks:
-
There are 3 different alert sounds. For Bluetooth ON, for Bluetooth connected and for Bluetooth
disconnected. When Bluetooth is ON, the word "Cascade" will appear on the phone. You can then connect it.
This diffuser can also be used as an ambient lamp by pressing only on button #2 (light).
-
PREPARING FOR USE
OPERATING INSTRUCTIONS
BUTTON # 1 ON/OFF
1.
Press once to start the diffusion and the lighting ambiance (7 changing colors)
2.
Press a second time to turn the diffusion off
3.
Press a third time to completely shut down the diffuser
BUTTON # 2 LED Light
1.
Press once to set the ambiance lighting to the color of your choice
2.
Press a second time to turn the light off
BUTTON # 3 Fountain
1.
Press once to start the fountain
2.
Press a second time to turn the fountain off
BUTTON # 4 Bluetooth speaker
1.
Press once to activate the Bluetooth speaker connection
2.
Press a second time to turn the Bluetooth speaker off
INSTRUCTIONS
Diffuser water tank
Fountain water tank
Publicité
Table des Matières
