Decommissioning - Pkm Schaub Lorenz SL 250 Mode D'emploi

The operating procedures described below are normal
 The refrigerant generates a sound similar to flowing water.
 Sometimes you may hear a sound which is generated by the injection process of
the cooling circuit.
The sides of the appliance may get warm while the appliance is running.

When you run the appliance for the first time or the temperature falls below a
certain level the appliance will operate with high power to reach the preset
temperature.
May be generated inside or outside the appliance by high humidity or very warm
ambient temperatures.
You will hear the compressor click when it is activated or deactivated.
Is caused by the compressor while running.
May be generated by sequential expansion and shrinkage of the components of the
cooling system. It is caused by variation of temperature before and after the
compressor is activated or deactivated.

7. Decommissioning

Decommissioning, temporarily
 If the appliance is not used for a longer period of time:
1. Draw the plug out of the socket.
2. Remove all food stored in the appliance.
3. Dry the inside of the appliance with a cloth and leave the door open for a few
days.
 While away on an average vacation/holiday (14-21 days):
1. Do the same as described above, or
2. Let the appliance operate.
a. Remove all perishable food from the cooling compartment.
b. Clean the cooling compartment.
c. Freeze all food which is suitable to be frozen.
 If you want to move the appliance:
1. Secure all removable parts and the contents of the appliance. Pack them
separately if necessary.
2. Transport the appliance in an upright position only. All other positions can
cause damage to the compressor.
3. Do not damage the feet of the appliance.
and do not indicate a malfunction.
Distinct noise
Condensed water in/on the appliance
Clicking
Hum
Knocking/snapping
32