Using The Remote Control; Installing Batteries; Remote Controller Functions - Marmitek FREE TV 200 Mode D'emploi

FreeTV200_20120_20060620_man
Click "Finish" to complete your setup.
PowerCinema 4 is an integrated multimedia player. On the homepage you can check out the
available media types. Use the mouse, the arrow keys Up and Down on the keyboard or the
Up and Down buttons on the remote control in order to select the desired media type.
To start with, select a media type on the homepage.
PowerCinema 4 will switch over to the selected media type, and playback buttons and other
options will appear.
Read the User's Guide on the CD to familiarize yourself with PowerCinema 4.
7. Remote Control

7.1 Using the Remote Control

The Remote control allows you to operate PowerCinema 4, such as turning your TV on/off,
viewing the TV, and changing the channels and volume. Aim the front of the Remote Control
at the FreeTV200 tuner and press the control buttons.

7.2 Installing Batteries

Before use, remove the plastic strip from the bottom of the remote control.
If the battery is empty, you can replace it yourself. Open the battery compartment at the back
and insert the Lithium Cell CR2025.

7.3 Remote controller functions

The up , down , left , and right
PowerCinema.
Press OK to accept a selection.
Press
With the up
The " " starts recording, the " " stops recording.
With "Snapshot " you can make a snapshot of the current image.
FREE TV200
tm
20-06-2006 10:42
to return to a previous page.
and down you can go through the TV channels.
Pagina 13
buttons navigate through
13