BIG ASS FANS BAFCon Manuel D'installation page 6

4. Install mounting bracket
Attach the mounting bracket to the mounting plate with the four 8-32 x 3/8"
pan head screws. Orient the bracket as shown depending on whether you
want the screen to tilt upward or downward.
Screen Tilted Upward
5. Wire controller
Insert the CAT5 cable from the fan into the FAN jack on the back of the
controller, and make any additional wiring connections as shown on the
following page.
For cable runs longer than 150 ft (45.7 m), use a 568B CAT5 cable.
Screen Tilted Downward
CAT5 Cable
Power and fan
communication