Publicité
Figure A
Commissioning
•
Please connect the unit to the power.
•
Please return the power switch (on the top
the unit) in the "I" position; the indicator light flashes red.
•
Please press the "MODE" button (9) to switch between the
following heat settings:
o Low (low, the indicator lamp lights green),
o medium (medium, the indicator lamp lights orange)
o High (high, the indicator lights up red).
•
Please press the button "OFF" to disable the device.
•
Please return the switch to the "O" position.
Remote control
With the supplied remote you can control the device as follows:
Please bring the main switch (on top of the unit) in the "I"
position to put the unit into standby mode; the indicator light
flashes red.
MODE button: please press the button once to turn the unit
on. By further pressing the button you can switch between the
three heat settings mentioned above.
OFF button: Please press the button to put the unit into standby mode.
Please bring the main switch in the "O" position to turn off the device.
Figure B
On
Off
14
Publicité
