Control Box Connections; 14-Pin Plug Information For Connecting Wire Feeder To Power Source - Miller S-74 MPa Plus Swingarc w/Drive Manuel Du Propriétaire

5-6. Control Box Connections

5-7. 14-Pin Plug Information For Connecting Wire Feeder To Power Source

J A
K
I
B
L
H N
C
M
G D
F
E
*The remaining pins are not used.
OM-253756 Page 16
1
Pin*
A 24 volts AC with respect to socket G.
B Contact closure to A completes 24 volts AC contactor control circuit.
G Circuit common for 24 volts AC circuit.
C +10 volts DC input from power source to wire feeder with respect to socket D.
D Remote control circuit common.
E 0 to +10 volts DC output signal from wire feeder to power source with respect to socket D.
H Voltage feedback; 0 to +10 volts DC, 1 volt per 10 arc volts.
F Current feedback; 0 to +10 volts DC, 1 volt per 100 amperes.
L 0 to +10 volts DC output signal from wire feeder to power source with respect to socket N.
M CC/CV select 0 to +10 volts DC.
N Feeder common.
K Not used.
2
3
4
Pin Information
1 Interconnecting Cable
2 Power Connector
3 19-Pin Receptacle
4 USB Port
255195-D / 255193-D