Safety Precaution: Securing the TV to the wall to
prevent falling
Preventing the TV from falling
These are general instructions. The brackets, screws, and string are not supplied by Samsung. They must be purchased
separately. We suggest consulting an installation service or professional TV installer for specific hardware and anti-fall
hardware installation.
1. Put the screws into one set of brackets, and then firmly fasten them to the wall. Confirm that the screws are firmly
attached to the wall.
You may need additional material such as wall anchors depending on the type of wall.
N
2. Remove the screws from the back center of the TV, put the screws into a second
set of brackets, and then fasten the screws to the TV again.
N
These screws may not be supplied with the TV. For a 32 inch model,
purchase M8 screws.
3. Connect the brackets fixed to the TV and the brackets fixed to the wall with a
durable, heavy-duty string, and then tie the string tightly.
Install the TV near the wall so that it does not fall backwards.
N
N
Connect the string so that the brackets fixed to the wall are at the same
height as or lower than the brackets fixed to the TV.
N
Untie the string before moving the TV.
4. Make sure that all connections are properly secured. Periodically check the
connections for any sign of fatigue or failure. If you have any doubt about the
security of your connections, contact a professional installer.
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In
particular, ensure your children do not hang on or destabilize the TV. This action
may cause the TV to tip over, causing serious injuries or death. Follow all safety
precautions provided in the Safety Flyer included with your TV. For added stability and
safety, you can purchase and install the anti-fall device as described below.
English - 17