Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
To connect the OMNITV3A with the amplifier to a
converter box or other tuning device:
OMNITV3A
8
Built-In
Coaxial Cable
ANTENNA
Amplifier
Insert
TV/STB
Converter Box
Audio/Video
Coaxial
Cables
–or–
Cable
TV
(continued)
1. Make sure your converter box
is turned off.
2. Connect the OMNITV3A's built-
in cable to the input jack of the
amplifier.
3. Connect the amplifier's cable
to the antenna input on the
converter box.
4. Follow the directions in the
manual that came with your
converter box to connect it to
your TV.
5. Plug the amplifier's power
cord into an electrical outlet.
Important: This power unit
should be plugged in so that it
stays vertical or lays flat.
6. Run your converter box's setup
routine to scan for available
broadcast channels.
Publicité
Table des Matières
