Ascend D10 Mode D'emploi page 25

ADJUSTING YOUR KAYAK'S SEAT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H10, H12 & 10T Seat
Step 1 – Choose one of the seat position slots.
Step 2 – Engage the side washer seat guide into
the seat slot. Ensure the washer engagement is
underneath the looped bungee.
Step 3 – Engage the opposite side seat guide into
the seat slot. Ensure the washer engagement is
underneath the looped bungee.
Step 4 – Apply pressure and tighten the tension
lock against the seat engagement slot until the
seat is firmly held in place.
FS10 Seat
Step 1 – Confirm the nylon rail guide is underneath loop, as pictured, on each side.
Step 2 – Engage the nylon rail guide into rail.
Step 3 – Apply pressure and tighten the tension lock against the seat rail mounts
until the seat is firmly held in place.
Rail & Side Engagement Model Designs
25