Publicité
Les langues disponibles
Les langues disponibles
FUNCTION:
Front Panel:
ON/OFF
Input
Output8
Output7
Output6
①
②
③
④
⑤
1.Switch ON/OFF : Control the device power on and power off.
2.HDMI OUT1 LED : The LED will be illuminate when HDMI OUT1 connect to
HDMI sink.
3.HDMI OUT2 LED : The LED will be illuminate when HDMI OUT2 connect to
HDMI sink.
4.HDMI OUT3 LED : The LED will be illuminate when HDMI OUT3 connect to
HDMI sink.
5.HDMI OUT4 LED : The LED will be illuminate when HDMI OUT4 connect to
HDMI sink.
6.HDMI IN LED : The LED will be illuminate when HDMI source detected.
7.HDMI OUT5 LED : The LED will be illuminate when HDMI OUT5 connect to
HDMI sink.
8.HDMI OUT6 LED : The LED will be illuminate when HDMI OUT6 connect to
HDMI sink.
9.HDMI OUT7 LED : The LED will be illuminate when HDMI OUT7 connect to
HDMI sink.
10.HDMI OUT8 LED : The LED will be illuminate when HDMI OUT8 connect to
HDMI sink.
11.RS232 : Connect to a PC or Laptop via RS232 terminal to D-Sub 9-pin cable
for FW update.
12.EDID Control : EDID Control allows the integrator to choose the handshake
that will be provided to source devices of the system.
CONNECT DIAGRAM:
DVD
USB
Output1
Output2
Output3
HD TV
HD TV
Output5
Output4
Output3
Output2
Output1
RS232
⑥
⑦ ⑧ ⑨ ⑩
Output4
Input
Audio
Toslink
HD TV
HD TV
Rear Panel:
EDID
1.HDMI OUT8 : Connects to HDMI sink equipment such as a display.
2.HDMI OUT7 : Connects to HDMI sink equipment such as a display.
3.HDMI OUT6 : Connects to HDMI sink equipment such as a display.
4.HDMI OUT5 : Connects to HDMI sink equipment such as a display.
5.HDMI IN : Connects to HDMI source equipment such as a DVD or Blu-ray
player.
6.HDMI OUT4 : Connects to HDMI sink equipment such as a display.
7.HDMI OUT3 : Connects to HDMI sink equipment such as a display.
8.HDMI OUT2 : Connects to HDMI sink equipment such as a display.
9.HDMI OUT1 : Connects to HDMI sink equipment such as a display.
10.DC 5V : Plug the 5V DC power supply into the unit and connect the adaptor
to an AC outlet.
5
RS232 CONTROLLER :
RS-232:
Speaker
Coaxial
5V/DC
7
Output1
Output2
Output3
Output4
Input
①
②
③
④
⑤
1. Connect PC to device by USB to RS232 tool
2. Open "EPConsle" and click "Start" button
Output5
Output6
Output7
Output8
12V/DC
⑥
⑦
⑧
⑨
⑩
6
8
Publicité
