Logicom Home Belly Notice D'utilisation page 34

(configuration mode).
When pushing the button of the device, the
device will ring to let you know someone is at
the door.
Resetting the product
To reset the product to the factory settings, you
need to press the RESET button (in the back of
the device) for several seconds until the LED
turns red and starts blinking. The blinking red
LED tell you it's ready to be reconfigured.
App download and account creation
Your Logicom Home smart product uses Tuya to
let you remotely control it.
In order to use it, you have to use the Tuya
software. This manual will only cover the Tuya's
smartphone application. For other platforms,
(
please go on Tuya's website https://en.Tuya.
)
com/ for more information.
34