How to Use
This appliance is for household use only.
BEFORE USING FOR THE FIRST TIME
• Remove all packing materials, any stickers and the plastic band around
the power plug.
• To register your product, go to www.prodprotect.com/russellhobbs.
• Turn to "CARE AND MAINTENANCE" and clean the appliance, to remove
manufacturing dust, etc.
FITTING/REMOVING WAND
1.
Unplug the appliance before fitting or removing attachments.
2.
To fit the wand, push it on to the end of the motor unit, and turn it
clockwise.
3.
To remove the wand, turn it counter-clockwise, then pull it off the
motor unit.
USING THE HAND BLENDER
1.
Once the wand is firmly attached, put the plug into the power outlet.
2.
Turn the speed control to the speed you want (1 = low, 2 = high).
3.
Press and hold the switch to start the motor. Release to switch off.
4.
Briefly pressing and releasing the switch will pulse the motor..
Generally, the wand can do anything a normal blender can do. You can blend,
pulp or purée ingredients in the pan or bowl you're going to cook them in.
Whatever container you use, make sure it's on a stable, flat surface, and support
it with your free hand, to prevent it wandering over the work surface.
• Don't immerse the wand past the top of the parallel-sided tube.
• When using it in hot liquids, don't let the blade break the surface at an
angle, as you might spray liquid outside the bowl/pan/container.
• Don't switch on till the blade is inside the food container.
• Switch off before lifting the blade from the food container.
6