Sub Function - Energy-Saving Cooling Operation - Friedrich DWC1 Manuel D'installation Et D'utilisation

Owner's instruction

Sub function - Energy-Saving Cooling Operation

Optimal energy savings by adjusting set point to room temp.
• Power saving function is possible to setup only when running air-cooling.
• Power saving function might not be operated at the partial product.
28 DWC1 Programmable Thermostat
Repeatedly pressing
1
until icon flash.
Operate or cancel Energy-Saving
2
function by pressing
button.
(To cancel power saving function,
you move to power saving menu by
pressing button, and then if pressing
button, power saving icon
disappears and the function is cancelled.
)
Press button to exit.
3
❈ After setup, it automatically
gets out of setup mode if there
is no button input for 25
seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
button