Maintenance Of Saw Chain And Guide Bar - GREENSTAR GS 6150 Mode D'emploi

(2) Needle bearing
(3) Clutch drum
(4) Spacer
(5) Clutch shoe
4. Fuel filter
Disassemble the filter and wash with gasoline, or
replace with new on if needed.
5. Oil filter
Disassemble the filter and wash with gasoline, or
replace with new on if needed.
6. Front and Rear dampers
Replace if adhered part is peeled or crack is
observed on the rubber part.
10.MAINTENANCE OF SAW CHAIN
AND GUIDE BAR.
SAW CHAIN
WARNING
!
It is very important for smooth and safe
operation to keep the cutters always sharp.
Your cutters need to be sharpened
when:
Sawdust becomes powder-like.
●
You need extra force to saw in.
●
The cut way does not go straight
●
Vibration increases
●
Fuel consumption increases
●
Cutter setting standards:
WARNING
!
Be sure to wear safety gloves.
Before filing:
●
Make sure the saw chain in held
●
sccurely
Make sure the engine is stopped
●
Use a round file of proper size for
●
your chain.
Chain type: 21VB
File size: 3/16 in (4.76 mm)
English