DeWalt DCR006 Manual D'instructions page 64

ENGLISH
LED indicator
Steady blinking (half
second interval)
Rapid Blinking
Solid light
No light
PAIRING SPEAKER WITH A BLUETOOTH
1. Place the speaker and the Bluetooth
of each other.
2. Turn speaker on by pressing the power button (a). The LED (b)
will light solid for 4 seconds to indicate the apparatus powered on
successfully and then go into a half second interval blink pattern.
3. Press the Bluetooth
rapidly indicating the speaker is in pairing mode and is discoverable
by your Bluetooth
4. Confirm pairing on your device. (Please consult your device's
instruction manual for specific pairing instructions.)
NOTE: If pairing is not confimed within 2 minutes, the LED will stop
flashing and the speaker will return to half second interval blink
pattern.
5. Once pairing is successful the LED indicator (b) will turn solid and the
speaker will emit a short tone. The speaker will now play music from
your device.
62
LED Speaker Status Indicator
Status/Mode
Speaker is unpaired or in
connecting mode.
Speaker is in pairing mode and
discoverable by your device.
Speaker is connected with a
device.
Speaker has timed out and/
or is off.
®
AUDIO DEVICE (FIG. 3, 4)
®
®
pairing button (c). The LED indicator light blinks
®
device.
audio source within 1 m (3.3')