Filter Replacement; Filter Cleaning And Replacement Cycles; Resetting The Filter Replacement Indicator; Forcible Reset Mode - cowey AP-0512NH Instructions

FILTER REPLACEMENT

- Check that the 'front' sides of filters are in the correct direction.
- For best product performance, use original Coway filters.
Tips
- Always unplug the air purifier before replacing filters.

Filter cleaning and replacement cycles

Filter
Deodorization filter
True HEPA filter
- Each service life is based on 8-hour use in maximum air speed.
- The recommended filter replacement cycles may differ depending on the operating
environment.

Resetting the filter replacement indicator

1. When the LED of filter replacement indicator blinks, replace
True HEPA filter.
2. After replacing filter, push the reset button for 2 seconds.

Forcible Reset Mode

When you have replaced a filter before the filter replacement cycle is reached, you can forcibly
reset the filter replacement cycle back to the factory default setting.
1. When the reset function is not activated, press and hold the reset button for 2 seconds.
2. When the reset LED is blinking, press and hold the reset button for 2 seconds. And then, the
accumulated time in electronic time counter is erased.
- If there is no input for 10 seconds in forcible reset mode, the reset mode is cancelled.
11
Cycles
Every 6 months
Every 1 year
Method
Replacement
Replacement
2 seconds