Setting Up Your Router; Where To Find More Help; How To Install Your Router; How To Connect To Linksys Smart Wi-Fi - Linksys EA9200 Mode D'emploi

Linksys EA9200

Setting Up Your Router

Where to find more help

Linksys.com/support (documentation, downloads, FAQs, technical support,
live chat, forums)
Linksys Smart Wi-Fi (linksyssmartwifi.com; click Help at the top of the screen)

How to install your router

If replacing an existing router, disconnect it.
1. Connect the antennas to the top of your router and power it on.
2. Connect the Internet cable from your modem to the yellow Internet port
on the back of your router. Wait until the Linksys logo on the front of your
router is solid.
3. Connect to the secure wireless name shown in the Quick Start Guide that
came with your router. (You can change these details later.) Select the
option to automatically connect to this network in the future. You will not
have Internet access until you complete router setup (see Step 4).
4. Open a web browser to launch the Linksys Smart Wi-Fi Router setup
instructions. If you don't see the instructions, type linksyssmartwifi.com in
the address bar.
At the end of setup, follow the on-screen instructions to set up your Linksys
Smart Wi-Fi account. Use Linksys Smart Wi-Fi to manage your router's settings,
including:
• Change your router's name and password
• Set up guest access
• Configure parental controls
• Connect devices to your network
• Test your Internet connection speed
NOTE
As part of Linksys Smart Wi-Fi account setup, you will be sent a
verification e-mail. Make sure that you open the e-mail from Linksys
and click the provided link, and log in from a device connected directly
to the router.

How to connect to Linksys Smart Wi-Fi

1. Open a web browser and go to www.linksyssmartwifi.com.
2. Enter the e-mail address and password you set up earlier and click Sign in.

How to change router settings

NOTE
For additional help on any menu, click Help at the top of the screen.
Setting Up Your Router
3