Samsung RF56M9540SR Guide D'utilisation page 37

To correct the door gap
CAUTION
The electrical connectors must be intact during this process. Use caution not to tangle the
connector wires or peel off the coating.
Untitled-4 37
Door gaps can be corrected using the
gap bolt on the top right corner of the
refrigerator.
1. With the door closed, use a Phillips
screwdriver to remove 3 screws on the
top cover with the wire connectors.
2. Use a 4 mm Allen spanner (not
provided) to correct the door gap
between two doors.
- To widen the gap, turn the gap bolt
clockwise.
- To narrow the gap, turn the gap bolt
counter clockwise.
3. When complete, reinsert the top cover.
English 37
4/24/2017 11:21:59 PM