Publicité
Les langues disponibles
Les langues disponibles
EN
User Manual
Stabilized switching power supplies
1
Safety Instructions
1.1
General
•
Read the user manual completely and carefully before use.
It is part of the product and contains important information for correct use.
•
Keep this user manual.
It must be available for uncertainties and passing the product.
Notes for network separation
The product has no power switch and may be used only in easily accessible outlets
to quickly remove it in an emergency and after use.
•
Voltage-free only when the plug is pulled.
•
In case of emergency, during thunderstorms and after use, pull the pro-
duct on its plug housing!
•
Do not open the housing.
•
Do not let the product unattended in use.
•
Only let a trained electrical engineer do installation, disassembling, main-
tenace and repairing work.
•
Compare the specifications of product, power supply and peripherals.
These must be identical.
•
Do not repair defective products by yourself, but contact the dealer or
producer.
•
Do not modify or alter product nor accessories.
•
Avoid stresses such as heat and cold, moisture and direct sunlight, vibra-
tion and mechanical pressure.
•
Only use in dry ambience.
•
Do not cover the product.
•
Risk of injury by stumbling and falling
1.2
Warning levels
Warnings against hazards that may result in injuries
in case of non-observance.
Warnings against hazards that may result in material
damage in case of non-observance.
2
Description and Function
2.1
Travel charger
This power supply is a universal, environmentally friendly and stabilized switching
power supply for IT and office equipment. It has exchangeable adapter plugs for
many common devices. The output voltage is variable.
2.2
Scope of delivery
Power supply, adapter plug, operating instructions (for details - see specifications)
2.3
Operating elements and parts
Tab. 3: Operating elements and parts
1 Housing
2 EURO mains plug
4 Adjusting tool
5 Adapter plugs
7 Operation LED
3
Intended Use
We do not permit using the device in other ways like described in chapter
Description and Function. Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4
Preparing
•
Compare voltage, mains voltage, frequency and polarity of
product, connected devise and mains.
•
Do not overload the product and attend to its name plate.
5
Connecting and Operating
Risk of injury by stumbling and falling
•
Ensure safe cable laying.
Material damage due to excessive output voltage
•
Set the output voltage according to the device type label.
1.
Set the output voltage, suitable to the name plate of your
device by using the adjustment tool.
2.
Select the fitting adapter plug.
3.
Connect the adapter plug in right polarity.
Most devices work with positive polarity, so with plus pole on the inner contact.
Fig. 2: Setting the polarity
4.
Connect the IT or office device to the power supply.
5.
Plug the power supply into a free and easily accessible mains
socket.
REV2017-07-13
V1.0
1
2
3
4
5
6
7
3 Output voltage adjuster
6 USB adapter
The operation LED lights when input power is supplied.
During use, there are no operating elements to use.
6.
Disconnect connections after use.
6
Specifications
Article number
59036
Input voltage
[V~ @ Hz]
Input current [A]
Output voltage
[V DC]
Output current [A]
0.3
Max. Output power
3.6
[W]
Stand-by Power
0.16
Consumption [W]
Input
Output
Dimensions [mm]
Cable length [m]
Weight [g]
130.0
DC adapters [mm]
3.50 x 1.35
/ 4.00 x
1.70 / 5.00
x 2.10 /
5.50 x 1.50
/ 5.50 x
2.10 / 5.50
x 2.50
Jack plug [mm]
USB 2.0
yes
Tab. 4: Specifications
7
Maintenance, Care, Storage and Transport
The products are maintenance-free.
Material damage
•
Clean only with a dry, soft cloth.
•
Do not use cleaning agents and chemicals.
•
Store cool and dry.
•
Store the product out the reach of children and in a dry and
dust-protected ambience when not in use.
•
Keep and use the original packaging for transport.
8
Liability notice
We reserve the right to printing errors and changes to product,
packaging or product documentation.
•
See our terms of warranty. These are available in their current
form under the given contact details.
9
Disposal Notes
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami
native and hazardous substances can pollute our environment.
As a consumer, you are committed by law to dispose electrical and electronic de-
vices to the producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on the pro-
duct, in the user`s manual, or at the packaging alludes to these terms. With this kind
of waste separation, application, and waste disposal of used devices you achieve an
important share to environmental protection.
WEEE No: 82898622
10
EU Declaration of Conformity
With the CE sign Goobay
ensures, that the product is conformed to the basic standards and directives.
- 2 -
NTS 300, 600, 1000, 1500
59035
59031
59033
59028
100-240 @ 60/50
0.5
3 / 4.5 / 5 / 6 / 7.5 / 9 / 12
0.6
1.0
7.2
7.2
12
12.0
0.20
Euro plug (Type C. CEE 7/16)
DC socket (universal. 2-Pin)
79.4 x 40.5 x 49.1
1.8
109.5
130.0
109.5
130.0
3.50 x 1.35
3.50 x 1.35
3.50 x 1.35
/ 4.00 x
3.50 x 1.35
/ 4.00 x
/ 5.00 x
1.70 / 5.00
/ 5.00 x
1.70 / 5.00
2.10 / 5.50
x 2.10 /
2.10 / 5.50
x 2.10 /
x 1.50 /
5.50 x 1.50
x 1.50 /
5.50 x 1.50
5.50 x
/ 5.50 x
5.50 x
/ 5.50 x
2.50
2.10 / 5.50
2.50
2.10 / 5.50
x 2.50
x 2.50
2.5 / 3.5
-
yes
-
yes
, a registered trademark of the Wentronic GmbH
®
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
59032
59029
0.8
1.5
18
18.0
0.30
83.8 x 44.5 x 50.2
138.0
158.0
3.50 x 1.35
3.50 x 1.35
/ 4.00 x
/ 5.00 x
1.70 / 5.00
2.10 / 5.50
x 2.10 /
x 1.50 /
5.50 x 1.50
5.50 x
/ 5.50 x
2.50
2.10 / 5.50
x 2.50
-
yes
Goobay
®
Publicité
