5.
Slide the brass nut over the sleeve and screw it into the inlet
port.
6.
Place an adjustable wrench on the nut attached to the plastic
waterline. Maintain position.
7.
Using a second adjustable wrench, turn the lower nut
counterclockwise and fully tighten it while holding the upper
nut in place. Do not overtighten.
8.
Turn on the water supply. Check for leaks and correct if
necessary. Continue to observe the water supply connection
for two to three hours prior to moving the refrigerator to its
permanent location. Monitor the water connection for 24
hours. Correct leaks if necessary.
Plug in Refrigerator
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Plug the refrigerator into a
grounded three prong outlet.
Installation Instructions
Move Unit to Final Position
WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
IMPORTANT: To avoid floor damage, make sure the levelers are
raised (not touching the floor) and the refrigerator is on the rollers
before moving.
1.
Place cardboard or plywood under the refrigerator. Remove
the dolly.
2.
Move the refrigerator straight back, evenly into the opening.
Be sure that the refrigerator side trims are not interfering with
the door opening. Also, be sure that the water tubing is not
kinked and the power supply cord is on top of the refrigerator.
Handle Installation
•
Some units do not come with the handle installed to allow
the customer to choose the handle style. Optional handle kits
may also be available. Contact your Dacor dealer for a list of
available handle kits.
•
The installation instructions for the handle are included with
the kit.
7