Honeywell HWBAP1052 Série Manuel D'utilisation page 8

US AP 2016/09/22
PERFORMANCE DATA SHEET
The System and installation shall comply with applicable state and local regulations.
Do not use with water that is unsafe or of unknown quality without adequate disinfection
before or after the system.
While testing was performed under laboratory conditions, actual performance may vary.
This system has been tested according to NSF/ANSI 42 for bacteriostasis.The
concentration of the indicated substances in water entering the system was unchanged
under the permissible limits for water leaving the system, as specified in NSF/ANSI
42. The system conforms to NSF/ANSI 42 for the speci c performance as veri ed and
substantiated by test data.
The term bacteriostatic indicated that the system limits the passage or growth of
bacteria that may already exist in the incoming water. It does not mean that the water
leaving the system is safer to drink than the water entering the system.
Influent Challenge Challenge requirement*
Native bacteria in water +/-20%
3 5
Influent Challenge Concentration of 1.0 x 10 CFU/ML - 1.5 x 10 CFU/ML, actual
*
levels remained the same within a variation from -9.57% to 2.82%
213PSIG
Pressure (High Side)