Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
controL PanEL
①
Power pad
①
Press to turn the air purifier on and off.
Lock key
②
Simultaneously press FAN(
unlock the air purifier.
change filter light
③
Detects the light for sleep mode indicates when it's time
to replace the actiPLus
to reset the counter.
fan speed
④
Press to toggle between the four fan speeds, 1 (low), 2
(medium),3 (high) and Turbo.
timer
⑤
Press to enable and disable the timer.
how to usE vEnga
• Press Power
①
to turn the unit on. The fan starts and LEDs
are switching on.
• Press Fan
④
to toggle between the four fan speeds.
• Press Timer
⑤
, Sleep
⑥
the desired function of venga (see "Control panel" and
"Function" sections). Once the function is activated, the
concerned light indicator lights. Press the button again
to exit the selected mode. When the filter needs to be
changed, the light
③
turn on.
• Press Power
to turn the unit off.
①
12
④
④
) and TIMER (
⑤
) To lock or
filter. Press 3 seconds ION (
®
or Ion
⑦
pad in order to initiate
②
⑤
sleep mode
⑥
Press to enable and disable the sleep mode.
ionizer
⑦
Press to enable and disable the ionizer.
⑦
)
CAUTION : Options of low and medium are used normally,
while options of high and strong are recommended to use
at the beginning of turning on or when the quality of air is
poor.
After venga turns on, sensors need to preheat for three
minutes. After the preheat, it switches to normal status
automatically.
③
⑥
⑦
Publicité
Table des Matières
