Putting The Micorphone On - MicroMic C 555 L Mode D'emploi

3
1. Put the behind-the-
neck headband on
as shown in figs. 3
through 5.
2. Should the microphone fit loosely, you may
bend the behind-the-neck headband and the
temple pieces inward:
• Hold the headband or temple piece firmly at
the points marked in fig. 6 and bend inward
with extreme care.
• Check whether the microphone fits better. If it
does not, bend the wire some more, again with
extreme care.
AKG C 555 L
3 Using Your Microphone
3.1 Putting the
4
Microphone on
5
Figs. 3 to 5: Putting
on and tightening
the headband.
Fig. 6: Bending the
headband and
temple pieces
to fit.
Refer to fig. 6.
17