Polk magnifi MAXSR Mode D'emploi page 19

Wall mounting your MagniFi MAX & SR1 Wireless
Surround Speakers
Wall mounting templates are provided for both
the bar and the surround speakers. For proper
installation, please refer to the instructions printed on
the templates. Screws for attaching the brackets to
the wall are not included. Choose the screw type and
TV OPTICAL AUX NETWORK SERVICE
length appropriate to your home's construction.
ONLY
HDMI 1 HDMI 2 HDMI 3 TV (ARC)
If in doubt, consult a professional.
Sound Bar Optical Input
SERVICE RESET SYNC POWER
My TV doesn't have an HDMI or Optical outputs
ONLY
If your TV does not have an HDMI ARC or Optical output you can connect the sound
bar to your TV using the included 3.5mm analog AUX cable.
1) Connect the included AUX cable between your TV's audio output and the AUX input on
the back of the sound bar.
2) Select AUX on the sound bar remote control.
3) Turn up the volume and make sure you hear sound from the sound bar.
4) Turn off the TV's speakers using your TV's Settings menu under "audio" or "speakers".
Note: Dolby 5.1 and DTS audio decoding are not supported when using the AUX input.
19