T.I.P. HNB 1600 Mode D'emploi page 9

found, do not use the appliance but contact
your service centre for repair.

• Should extension cables be used, ensure
that these lay on dry surfaces and protected
against water jets.

• If the equipment should overturn it is
recommended that the machine should be
stood up before switching off.

• ggressive solvents or detergents should
not be used.

• The machine must be always used on
horizontal bases.

• Keep the machine on plane surfaces.

The equipment should not be used to
•
pick up water from containers, lavatories,
tubs, etc.

• These machine are not designed for
picking up health endangering dusts or
inflammable/explosives substances.

• Before vacuuming liquids, check the float
functions correctly.

• If foam/liquid should come from the machine
exhaust switch off immediately.

• Do not use the machine without proper
filters.

• For wet & dry vacuum function, always put
the stopper (F) on the tank (I).

• Service and repairs must be carried out by
qualified personnel only. Only use manufacturer
original spare parts for service repair.

• The manufacturer
responsible for any damage/injury caused to
persons, animals or property caused by misuse
of the appliance, not in compliance with manual
instructions.
W RNING (POND CLE NER)

•
the emptying of pond and/or artificial lake,
lavatories, tubes, etc.

•
on the extensions (M).

•
safety distance of 2 mt from the pond/lake
border.

•
inside the pond/lake.

•

•
created in respect of national and international
rules on this matter.

•
horizontal bases, in a safe and stable way.

•
in order to move the machine.

•
control.
HOW TO OPER TE
cannot be held
The equipment should not be used for
ssembly always pond cleaner nozzle (C)
While placing the machine please keep
Do not use the machine when people are
Do not use the machine when it rains.
The ponds and the small lakes must be
The machine must be always kept on
While working, do not drag the flexible hose
While machine is working keep it under
(−) UTOM TIC:
operation
(pond cleaner function)
0 (0) OFF: machine switched off
(=) M NU L:
manual operation (wet & dry
vacuum cleaner function)
GB