Comelit AHDVR040B Guide Rapide page 22

4. ▲▼◄►: Direction key
5. POWER led
6. IR receiver
7. REC: Manual recording key
DVR rear panel
LAN: 10/100 Mbit/sec. standard Ethernet port
VGA: VGA video output connector
USB: USB connectors
ALARM:
alarm input/output
Turn ON / OFF
Confirm that AC voltage accessible matches with DVR. Ensure that the DVR power outlet connect with a good
middle ground grounding. After switching power, the device started, 【POWER】 light is on. Turn into system,
if the panel status light flashing, it's normal conditions.
After device start, preview interface can be seen immediately. In the preview interface you can see the system
date, time, channel name.
Note: Default password is empty, click "OK" can into menu directly.
Main Menu Introduction
Press MENU key or right mouse, it will pop-up the main menu. Main menu consists of the following
components:
11. ESC: Exit key
12. MENU: main menu key
13. N.C.
DC12V: 12 VDC power supply connector
HDMI video output
Audio IN/Audio OUT: audio input/output connectors
VIDEO IN:
video inputs
21