Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Conforms to: ISO 8502-4, BS7079-B and ASTM D3276
Specifications
Temperature
Range
Laser Pointer
Distance to Spot Ratio (D:S)
Emissivity
Response Time
Spectral Response
Before returning the instrument for service...
1. Install new batteries in the proper alignment as shown within
battery compartment.
2. Examine the surface temperature sensor for dirt or damage.
3. Perform a Hard Reset. (see pg. 5)
4. If issue is not resolved, Updates (pg. 10) your PosiTector
gage body and re-attempt measurements.
IMPORTANT:
If you must return the Gage for service, please fill out and include
the Service Form located at www.defelsko.com/support with the
Gage. Be sure to also include the probe, your company name,
company contact, telephone number and fax number or email
address.
Technical Data
Technical Data
Range
–70˚ to 380˚ C
–94˚ to 716˚ F
Returning for Service
Returning for Service
Accuracy
± 1˚C + 1%
@ 23˚ C ambient
Class 2 < 1mW
<500 µs (95% response)
11
Resolution
0.1˚ C
0.1˚ F
5.7:1
Adjustable
2 - 14 µm
Publicité
Table des Matières
